0.3–5 mmEpoxy Flooring
Self-levelling, screed and coating grade epoxy from 0.3 mm to 5 mm. Seamless, chemical resistant and easy to clean.
Industrial Flooring
Eleven flooring systems for plants, warehouses, cleanrooms and car parks — specified around the traffic, the chemistry and the shutdown window you can afford.
Flooring systems
The right floor for the load it carries
A floor fails for one of three reasons: the wrong system, poor surface preparation, or joints that were ignored. We take all three seriously before the first drum is opened.
0.3–5 mm
4–9 mmPU Flooring
Polyurethane screed for thermal shock, hot water wash-down and heavy impact. Handles steam cleaning that cracks epoxy.
TestedESD Flooring
Conductive systems with copper earthing grid, installed and tested to the resistance range your process requires.
DissipativeAnti-Static Flooring
Static-dissipative finishes for control rooms, server halls and assembly lines where charge build-up is the risk.
HACCP readyFood Grade Flooring
Non-tainting, seamless PU and epoxy with coved skirting and falls to drain — built to pass an audit as well as a wash-down.
GMP suitedPharma Flooring
Low-VOC, seamless, coved and crevice-free finishes suited to controlled environments and GMP documentation.
Large bayWarehouse Flooring
Large-bay flooring with joint filling, abrasion-resistant toppings and line marking laid to the flatness racking needs.
Anti-skidParking Flooring
UV-stable deck systems with anti-skid aggregate on ramps, bay marking and integral waterproofing for exposed decks.
Multi-sportSports Flooring
Acrylic and PU multi-sport surfaces for indoor and outdoor courts, with cushioned build-ups and game-line marking.
DensifiedConcrete Polishing
Mechanically ground and densified concrete — a hard, dust-free, low-maintenance floor with no coating to peel.
Base slabVDF Flooring
Vacuum dewatered flooring for a dense, flat, high-strength base — the right foundation before any resin system.
Comparison
Epoxy vs PU, without the sales pitch
- 01
Traffic & impact
Epoxy — good for forklifts and pallet trucks.
PU — excellent, takes steel wheels and drops. - 02
Temperature
Epoxy — up to about 60°C.
PU — thermal shock and steam cleaning. - 03
Chemical exposure
Epoxy — oils, solvents, mild acids.
PU — aggressive acids, fats and sugars. - 04
Typical thickness
Epoxy — 0.3 to 5 mm.
PU — 4 to 9 mm. - 05
Cure & downtime
Epoxy — shorter, lower cost.
PU — longer, higher cost. - 06
Best suited to
Epoxy — engineering, assembly, warehouse.
PU — food, dairy, pharma, breweries.
Step 1Surface preparationPreparation
Ninety per cent of a resin floor is what happens before the resin
Diamond grinding or shot blasting to open the concrete profile, moisture testing, crack routing, joint arrangement and priming. It is the least glamorous part of the job and the only reason the floor lasts.
- Moisture testing before priming, on every slab.
- Diamond grinding or shot blasting to the profile the system needs.
- Cracks routed, filled and reinforced; moving joints carried through.
- Dust-extracted equipment so adjoining production can keep running.
FAQ
Flooring questions we get asked
Epoxy or PU — which one do I need?
If the floor sees hot water, steam cleaning, sudden temperature change or aggressive food acids, specify PU. If it sees forklifts, oils and general chemicals and needs a hard, cost-effective seamless finish, epoxy is usually right.
How much downtime does an epoxy floor need?
For a typical self-levelling epoxy, plan on surface preparation plus about three to four days before light foot traffic and around seven days before full vehicle loading. Fast-cure systems can compress that where a shutdown window is tight.
Can you coat over an old, oily factory floor?
Only after mechanical preparation. Oil-contaminated concrete has to be degreased and then ground or shot blasted back to a sound, open profile. Coating over contamination is the most common cause of peeling floors.
Do you do line marking and bay numbering?
Yes. Walkways, forklift lanes, hatching, hazard zoning and bay numbers are marked in durable two-pack paint as part of the same package.
Free site inspection
Planning a shutdown? Let us work backwards from your window.
Give us the shutdown dates and the area. We will tell you which system can realistically be cured and loaded in that time.